Home
MX Racing Tips
MX Sponsorship
MX Track Design
MX Riding Tips
Jumping Techniques
MX Crash Videos
MX Video Clips
MX Graphics
Used Dirt Bike info.
Dirt Bike Maintenance
Suspension Setup
Control Setup
RideGear Store
MX Gear
Dirt Bike Helmets
The RMZ450 Project
Kawasaki Dirt Bikes
Yamaha Dirt Bikes
KTM Dirt Bikes
Suzuki Dirt Bikes
Honda Dirt Bikes
Husqvarna Dirt Bikes
Dirt Bike Security
Photo Gallery
Dirt Bike Games
MX 101 Blog
Make A Donation
Contact/About Us
Site Map
Report Broken Links

XML RSS
What is this?
Add to My Yahoo!
Add to My MSN
Add to Google
 

MY List Of Favourite Motocross Riding Tips.





1. Motocross riding tips for forearm pump.
Forearm pump is probably one of the main complaints I hear from riders. Forearm pump is caused by strenuous use of the muscles in your forearms, the muscles become engorged with blood and as they expand the blood can't flow effectively. This causes a loss of sensation and loss of strength (hanging onto the handlebars by your fingertips sound familiar?).

Another factor is a build up of lactic acid in the muscles during and after they're exercised, which causes muscles to ache and become sore.

There's enough involved in overcoming forearm pump that it probably needs its own page.

Click here for some motocross riding tips to help beat the Popeye arm syndrome!

2. A firm front brake.
The night before your race meeting get a zip tie or something similar and tie your front brake lever on. The pressure from the brake being applied over a number of hours will force any air out of the fluid and will give you a firm feeling front brake instead of a spongy one. Just don't forget in the morning when it's dark and you can't figure out why the bike is so hard to push!

3. Pre-braking.
This is one of my favourite motocross riding tips because it can make slower riders like me look faster!

When racing on sandy and soft tracks the braking area into corners will get really rough and whooped out. Instead of trying to brake in the rough area, brake before the bumps and then accelerate over them into the corner.

You can brake more effectively in the smooth part of the entry into the corner and then when other riders are braking in the rough area you can make ground on them by accelerating over the braking bumps. Accelerating also unweights the front wheel making the bumps feel smoother.

4. Over-rev out of the gate.
Don't over-rev your bike off the start. I had a friend, who is quite a fast rider, point it out to me that I was over revving in each gear after my starts.

I was riding a 250 2 stroke at the time and it made a huge difference when I started changing up a gear earlier than I had been doing and keeping the bike in the broader part of the powerband.

How to pull a motocross holeshot is covered in more detail here.

5. Be aware of changing track conditions.
A track can change so much from race to race. I was racing at my home track when it rained halfway through the meeting. I had gone out to have a look at the track after my race when a corner marshall pointed out to me that nearly every rider was following one slippery line into a berm. I went out for my next race and took a higher line into the corner that had a lot more traction and made up ground on the riders in front of me every lap by being able to brake later and having a better entry line into the corner.

You may not always be able to get right up to the track between races but it pays big dividends to be aware of how the track changes through the day.






These are just a few of my favourite motocross riding tips that I've picked up from racing bikes. If you have any motocross riding tips you'd like to share, contact me and I'll put them up here for everyone to see.

Google
Web www.motocross-racing-tips.com

Please note that to protect our younger visitors to Motocross 101, SafeSearch is turned on in these search results.


footer for motocross riding tips page